These Alloy/Plastic Folding pedals appropriate for Mountain Bikes Folding Bikes Fixed Wheel Bikes Hybrid Bikes and any Commuter Bikes.They are simple to fit and require only an open ended 15mm spanner and a little lubricant or grease to make screwing into the pedal arm easier.Features: * Thread fitting size is 9/16.
This is the most common fitting size with only a handful of Kids 'bikes with the older 1/2 thread size * Smooth strong steel axle with steel bearings * Designed to give good grip in all weathers * Built in reflectors front and back so they do not fall off * 100mm length and 70mm width * Weight 425g per set Fitting Guide: * Remove your old pedals with a 15mm open ended spanner
. Note that to reverse the best hand pedal you turn the pedal thread in an anti clockwise direction. The left hand pedal is removed by turning the pedal thread in a clockwise direction. * Make sure the threads in your crank arms are clean. * Take your best hand pedal(see photo of
axles to see R and L stamped to show which pedal is which)and apply a percentage of grease or lubricant to the thread. This will assist to avoid your pedals merging to the crank arms. Grease is works finest. * Using your fingers only at this time gently press the thread of the pedal into the threaded part of the crank and turn the crank backwards
. The thread should begin to screw in. If it is not screwing in smoothly and quickly remove and begin once again. Examine that you have the properly sided pedal. * Once many of the thread had actually been screwed in by hand finish with the 15mm spanner. They must be tight however not so tight that they begin to cut into the crank arm.
* Repeat for the left hand side.
Suitable for Mountain Bikes, Folding Bikes, Fixed Wheel Bikes, Hybrid Bikes and any Commuter Bikes
Thread fitting size is 9/16. This is the most common fitting size with only a handful of Kids' bikes with the older 1/2 thread size
Smooth strong steel axle with steel bearings
Designed to give good grip in all weathers
Weight 425g per pair